• +91-9223503903
  • Solution Provider

    Of Industrial Automation

  • Distributor

    Of Industrial Spares

Model 335 Three Conductors, 3@30amps & 500V

Disconnects included (6 lg.)
Boot Kit available
Available with stainless steel
ball bearing (335-SS)

Model No. Terminals Voltage AC/DC Amp Rating @240VAC Max. Freq. MHz Contact Resistance Max. RPM Temp
Max.F(C) / Min. F (C)		 Rotation Torque
(gm-cm)		 Circuit Separation
330 3 0-500 30 100 <1m 500 140 (60) /-20(-29) 700 >25M
330-SS 3 0-500 30 100 <1m 500 140 (60) /-20(-29) 700 >25M

"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)

Model 335 Accessories

57335

Boot Kit for dust or splash protection IP51



55250

Terminal 16 - 14 AWG (qty. 3 included)


55251

Terminal 16 - 14 AWG
(qty. 3 included)

Terminals for other wire gauges available.
(22-18 AWG and 12-10 AWG)

Model 335 Standard Wire Connections

Model 335 Wire Connections With Optional Boot

Model 335 Suggested Mounting Methods

Model 335 is typically mounted by either the black body or the white plastic bushing on either end using a set screw. When mounting horizontally, mount the Mercotac so the body of the connector rotates.

Typical Body Mount Hole Dimensions
MODEL HOLE DIAMETER (Ø) * DEPTH
335 et al 1.575" (40.0) .80" (20)
Typical Bushing Mount Hole Dimensions
MODEL HOLE DIAMETER (Ø) * DEPTH
335 et al .984" (25.0) .80" (20.3)
*Inch (mm) Tolerance Ø +.001" (+.025)
-.000" (-.000)

Installation Notes:

  • The up arrow should not point below horizontal
  • Do not solder to or bend connector tabs
  • Avoid lateral forces and mechanical loads (overly stiff or tight wires)
  • Do not rigid mount both ends of connector
  • Limit mounting eccentricity (runout / wobble) to .005" (.13mm)
  • Provide overload protection within the circuit
  • Avoid vibration and bumping motions