• +91-9223503903
  • Solution Provider

    Of Industrial Automation

  • Distributor

    Of Industrial Spares

Model 435 Four Conductors, 4@30amps & 500V

Disconnects included
(8 lg.)
Boot Kit available
Available with stainless steel ball bearing (435-SS)

Model No. Terminals Voltage AC/DC Amp Rating @500VAC Max. Freq. MHz Contact Resistance Max. RPM Temp
Max.F(C) / Min. F (C)		 Rotation Torque
(gm-cm)		 Circuit Separation
435 4 0-500 30 100 <1m 300 140 (60) /-20(-29) 850 >50M
435-SS 4 0-500 30 100 <1m 300 140 (60) /-20(-29) 850 >50M

"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)

Model 435 Accessories


55250

16 - 14 AWG (qty. 4 included)


55251

Terminal 16 - 14 AWG (qty. 4 included)


57430

Boot Kit for dust or splash protection IP51

Terminals for other wire gauges available.
(22-18 AWG and 12-10 AWG)

Model 435 Standard Wire Connections

Model 435 Wire Connections With Optional Boot Kit

Model 435 Suggested Mounting Methods

Model 435 is typically mounted by either the black body or the white plastic bushing on either end using a set screw. When mounting horizontally, mount the Mercotac so the body of the connector rotates.

Typical Body Mount Hole Dimensions
MODEL HOLE DIAMETER (Ø) * DEPTH
435, et al 1.772" (45.00) .80" (20)
Typical Bushing Mount Hole Dimensions
MODEL HOLE DIAMETER (Ø) * DEPTH
435, et al 1.250" (31.75) .80" (20)
*Inch (mm) Tolerance Ø +.001" (+.025)
-.000" (-.000)

Installation Notes:

  • The up arrow should not point below horizontal
  • Do not solder to or bend connector tabs
  • Avoid lateral forces and mechanical loads (overly stiff or tight wires)
  • Do not rigid mount both ends of connector
  • Limit mounting eccentricity (runout / wobble) to .005" (.13mm)
  • Provide overload protection within the circuit
  • Avoid vibration and bumping motions